Today, aquatic drifting feed equipment innovation is very popular in the manufacturing of aquafeeds, as it can be used to generate a selection of feeds, whether floating or sinking, depending upon the demands of each types. In addition, the extruded feed made by marine drifting feed maker has much less contamination and also high effectiveness, helping to improve digestibility.
During the aquatic drifting feed device extrusion procedure, mechanisms such as temperature, moisture, stress will increase starch gelatinization, decay as well as soften the cell wall as well as launch some easily digestible substances, thus promoting the digestion as well as absorption of farmed pets.
Via water drifting feed machine extrusion technology, it is possible to inhibit certain protease preventions (such as antitrypsin), destroy microorganisms in resources or adjustment healthy protein residential or commercial properties to additional enhance the contact with enzymes in fish and shrimp, aiding to absorb food extra conveniently.
Extruded feed made by marine drifting feed maker can control the web content of compounds and also assist far better detoxing. At the same time, the longer stablizing time in the water (12-36 hrs) aids farmers to observe as well as manage the feeding timetable.
Related post: Fish Feed Factory
Although extruded feed made by floating fish feed making equipment has noticeable advantages over pelleted feed, the first investment price of extruded feed manufacturing is greater, resulting in higher feed costs.
However, for premium fish farming, more and more people are taking notice of the market possibility of premium fish feed.
1. Highlight of aquatic drifting feed device.
Feeding, rotating cutting, as well as main drive all adopt frequency conversion rate regulation system, which has strong power, steady procedure, energy conserving, high water production effectiveness, resilient tools, low failure rate, and convenient operation and also maintenance.
The screw of drifting feed device is made of alloy material by unique process, the service life is 3-4 times longer than that of domestic similar devices, and also the expense of creating feed is reduced; the fractional mixed screw is suitable for a variety of raw materials as well as more varied items.
Automatic lubrication system of the drifting feed machine minimizes power intake and prolongs life span.
The feeding system embraces spiral forced feeding, as well as the feeding is uniform as well as wide. It can be outfitted with an automatic feeding system. The feeder is a screw sharing variable regularity rate control to adjust the feeding amount to regulate the puffing output (quantitative feeding, as well as can successfully avoid the material from curving).
Linear bearing device modification system, change the device properly and swiftly.
Related post: https://www.richipelletmachine.com/fish-feed-factory/
The twin-screw of floating feed maker has self-cleaning feature, and the use of devices is more practical and also hassle-free.
Update the configuration of different devices modern technology and equipment to make the result of the twin-screw drifting feed maker bigger.
Different screws as well as length-diameter ratios can satisfy different production procedures.
Aesthetic automatic temperature level control system to make temperature control extra intuitive and parameters extra precise.
The total floating feed machine arrangement The procedure of the fish feed pellet extruder is more user-friendly and the upkeep is more convenient.
Dry blowing procedure embraces self-heating approach without steam system, which is a lot more in line with the actual demands of customers.
No adhesive is required to refine the floating feed, and also it can maintain security in water for more than 12 hours.
Tiny and also medium equipment is especially appropriate for clinical research study organizations, special reproduction farms or tool and also small feed factories. There are additionally specifically customized experimental twin-screw drifting feed machines readily available for clinical study devices.
Related post: Sinking Fish Feed Machine
2. The difference between pellet feed and also squeezed out feed.
With the growth of the floating fish feed handling sector, 2 commonly utilized technologies currently utilized to generate aquafeed are pelleting and extrusion by floating feed maker. Contrasted to natural lures, such feeds have greater dietary material as well as stability, less dampness, less complicated storage space, less pathogens, and also longer storage times.
Pelletizing by drifting feed equipment is a technique of pressing little pellets of resources right into larger pellets, during which humidity, temperature level as well as pressure can significantly impact the top quality of the feed.
Among the primary benefits of pelleted feed is reduced production expenses. Nevertheless, it has some downsides.
Among the largest drawbacks of pelleted feed is that it sinks faster as well as dissolves swiftly in water (according to statistics, about 10-15% of feed is wasted), which means greater feed expenses, lower farming revenues, and much easier reason water pollution.
3. Pick pellet feed or extruded feed?
Farmers, choose pellet feed or extruded feed?
When picking feed, farmers must consider the features of various water types as well as feeding behaviors. Due to the fact that the behavior of shrimps and also crabs is to discover food near the bottom, and then consume the food gradually, so the food should not be too difficult and also not quickly soluble in water.
For that reason, extruded debris by floating feed device is the best choice since it is soft and also hard to liquify in water, and also it is convenient for shrimp and crab to consume, lowering feed waste and reducing water pollution.
Especially in extensive shrimp farming, extruded feed needs to be dominant, since it is much easier for shrimp to digest healthy protein from extruded feed, which minimizes feed waste and advertises better protein absorption.
At the same time, we can also raise the absorption rate of the feed by adding helpful microbes or boosting digestive products to the feed.
However, from a long-term point of view, using extruded feed, which is made by drifting feed machine will enhance the cost, and also if the fish usage squeezed out feed in the fully grown duration, it might bring about fish fat, large belly, bad stress capability, not suitable for long-distance transport, etc, resulting in a affordable price at the time of sale.
As a result, in the process of aquaculture, when several farmers utilize feed, they commonly utilize a mix of pellet feed and squeezed out feed, which not just manages water quality, reduces feed residues, however additionally improves efficiency as well as financial benefits.
At the same time, the tank farming market is promoting the additional advancement of both feeds as a result of their corresponding advantages.
Recommended Site
4. Installment of drifting feed device.
( 1) Installation of floating feed machine pipe shelf.
The selection of the installation placement of the pipe rack relies on the website area, yet it needs to not be too much from the major engine. Far from the main engine will certainly cause waste of products during pipe link on the one hand, as well as trigger the hysteresis of the control system on the other hand.
If the installment area on website permits, the very best placement of the pipeline rack is to be straight behind the main engine and conditioner, parallel to the major engine, and about 1 meter away from the major engine (there is a certain upkeep room), while making certain that the pipe rack is adjusted upwards. The position of the steam line interface of the conditioner is on the side of the conditioner.
In order to assist in the cleansing of the ground as well as the outflow of drainage in the future, the pipe rack should be raised by around 10 cm throughout setup. In the setup of each shutoff in the pipe, the placement of the shutoff wheel need to satisfy the demands of convenient procedure for floating feed equipment.
( 2) Setup of drifting feed maker control box.
In order to assist in the procedure, the installment placement of the on-site control box ought to be picked near the bypass, and also a particular room ought to be scheduled in between the bypass as well as the control box to momentarily put the wastes streaming from the bypass.
The range in between the frequency converter of the reducing electric motor as well as the rotating positioner of the on-site cutter need to not be too much. It is managed by voltage. If the distance is too much, it will certainly trigger voltage changes and also impact the cutting effect.
The circulating temperature screen tool on the on-site control box is to present the temperature level of each end of the puffing tooth cavity in real time, and also the shown temperature series has specific needs. Section 2 Development cavity ... until the material discharge expansion tooth cavity, this sequence needs to be taken notice of when circuitry the electric control.
In addition, there are 4 nozzles on the water inlet pipe of the dual-shaft differential conditioner of drifting feed machine. They manage the opening of each nozzle with the electro-magnetic cut-off valve.
The drifting feed maker conditioner inlet nozzle switches over 1 to 4 on the control box correspond to the conditioners The first nozzle to the 4th nozzle from the feed end.
For details please contact: Pelleting Machine
WhatsApp：86 138 3838 9622
Email：enquiry@richipelletmachine.com
留言列表