The main feature of the fish feed floating pellet making equipment is to directly extrude puffed food. Typically, grains, potatoes or beans are used as the primary basic materials.
After being extruded by thefloating fish feed making device, under the problems of heat as well as high pressure, the item is blown by using the stress difference inside as well as outside the device
The direct extrusion kind puffed food normally does not have lead, as well as now the fish feed floating pellet making machine is widely made use of in the food market. So how much do you learn about the drifting fish feed extruder? The fish feed drifting pellet making device has a pair of screws as well as a screw sleeve, which have the features of mixing and also massaging.
After the raw material enters the squeezing out tooth cavity, the material undergoes extrusion, rubbing and also shearing in between the screw sleeves, and the inner pressure continues to rise, as much as 4Mpa, and the temperature remains to rise, approximately 140 ℃.
Related post: Fish feed extruder
Within 3-7s, the temperature and pressure of fish feed floating pellet making machine rise sharply, as well as the tissue framework of the product modifications, which even more gelatinizes the starch, denatures the healthy protein, destroys the crude fiber, and also kills harmful bacteria such as Salmonella.
The high-temperature and high-pressure product appears of the discharge port, as well as its pressure is unexpectedly released in an split second, and the moisture is partly blinked.
1. The framework of floating pellet making maker.
The feeder is to ensure consistent and also stable feeding, and also adjust the feeding amount according to the rated current value of the motor of fish feed floating pellet making maker. Normally, an electro-magnetic speed-regulating motor or a regularity converter is made use of to change the rate, and the feeding quantity of the feeder is altered.
Expansion tooth cavity of fish feed floating pellet making equipment is composed of screw, screw sleeve, design template, card bone and so forth. The screw and also screw sleeve are combined in areas, the compression degree can be adjusted according to the type as well as needs of the extruded feed, as well as the extruded degree of the extruded feed can be transformed;
Related post: https://www.richipelletmachine.com/fish-feed-extruder-machine/
The fish feed floating pellet making device is divided into 3 sections in regards to collapse degree according to operate and also place:
① Feeding area: This area of floating fish feed machine has a huge screw pitch, and also generally shares and also compresses the product so that the product fills up the spiral groove;
② Compression area: The screw groove of this section modifications from deep to shallow along the material relocating instructions to compress the product;
③ Extrusion area: the screw groove is shallower, the pitch slowly diminishes, the extrusion force can get to 3.0-10Mpa, as well as the temperature can get to 120-150 levels Celsius. This area has the highest stress as well as highest possible temperature, so the wear of the screw and screw sleeve is also the most severe.
The electrical outlet of the extrusion area is a layout, the form of the layout is created with various die openings according to the demands of different feeds, the material is squeezed out from the die opening of the layout and also goes into the environment, the pressure and also temperature decline dramatically, and also its volume increases swiftly, the water promptly vaporizes, dehydrates and also solidifies to end up being an extruded product.
Related post: Shrimp Feed Mill
2. Repair service of fish feed floating pellet making device
Transform the fish feed drifting pellet making machine on-site control button to the quit state during maintenance;
The inside as well as beyond the fish feed drifting pellet making equipment ought to be cleansed after each shift, particularly the product must not be maintained in the puffing chamber, so regarding prevent it being challenging to tidy up after cooling and load;
The large pulley-block of the primary shaft of the puffing chamber must be cleaned often, and also not excessive dust, otherwise the sheave will certainly be out of balance as well as the puffing chamber will shake;
The main bearing of the expansion chamber is lubed with lubricating oil, as well as the bearing of the fish feed drifting pellet making machine conditioner and its transmission device and also other bearing components are lubed with oil; hop over to this web-site
The primary bearing needs to be replaced with new oil regularly. After 250 hrs of job, all brand-new oil must be replaced;
Various other bearing parts, every two days of job, grease is injected when;
The chain transmission device on the steam conditioner ought to be lubricated regularly;
The oil in the reducer of fish feed drifting pellet making machine should be regulated at the adjusted oil degree, and the brand-new oil must be replaced after 250 hours of procedure;
When getting rid of the screw head, do not knock it hard;
Always keep the fish feed drifting pellet making device and also its environments tidy.
For details please contact: pellet plant
WhatsApp：86 138 3838 9622
Email：enquiry@richipelletmachine.com
留言列表