High-moisture product natural plant food quickly natural plant food pellet making device is additionally called damp stirring tooth natural plant food pellet making machine, inner turning mixing tooth granulator, this granulator is a fertilizer pellet making device
Wet organic fertilizer granulator is commonly utilized in the granulation of organic fertilizer. As a result of the high granulation price, secure procedure, tough as well as sturdy equipment, lengthy service life, as well as secure base layout, it runs extra smoothly, so it is picked as the ideal product by the bulk of individuals.
The requirements as well as models of the damp natural plant food pellet making equipment are 400, 600, 800, 1000, 1200, 1500 as well as other requirements, as well as can also be personalized according to user requirements.
Related post: pellet making machine
1. Functioning concept of organic fertilizer pellet making maker
The mixing tooth organic fertilizer pellet making equipment utilizes the mechanical stirring pressure of high-speed turning and the resulting wind resistant force to make the great powder product continuously recognize the processes of blending, granulation, spheroidization, as well as densification in the machine, so regarding attain the objective of granulation.
The bit form is round, the fragment dimension is typically between 1.5 ~ 4 mm, and also the granulation rate of 2 ~ 4.5 mm fragments is ≥ 90%. The bit diameter can be readjusted suitably by the material mixing quantity and also the pin rate. Typically, the lower the mixing amount, the faster the speed. High, the smaller sized the bits, as well as the other way around the larger the bits.
The mixing tooth organic plant food pellet making device refines the fermented natural resources right into granules. Compared with the disc granulator, the yield is greater, the granules are uniform, smooth, high in toughness and also low in water material. The temperature after developing is about 30 levels.
After the fermented raw materials are pulverized, they are combined with a mixer to make sure that the dampness content of the product is in between 35% and 40%. After getting in the natural fertilizer pellet making equipment, spherical particles can be processed.
It capitalizes on the fact that organic fertilizer raw materials are inlaid with each other under a certain result, and the particles produced are rounded, smooth as well as high in strength. Needed additives and also adhesives can additionally be added to further improve product quality.
The organic fertilizer resources ideal for the stirring tooth natural fertilizer making device consist of: animals as well as poultry manure, compost fertilizer, green manure, sea plant food, cake plant food, peat, dirt and various fertilizer, three wastes, microorganisms and community strong waste, and so on.
Related post: https://www.richipelletmachine.com/organic-fertilizer-pellet-making-machine/
The certified granulation rate of this organic plant food pellet making machine is as high as 90% or more, and it appropriates for a selection of various formulas. This maker is most appropriate for direct granulation of natural plant food after fermentation, leaving out the drying procedure and significantly lowering the production price. Consequently, the stirring tooth organic fertilizer pellet device is favored by the bulk of customers.
The natural plant food granulator equipment generated by our business remains in short supply, power conserving as well as environmental management are credible!
2. The scope of application of natural plant food pellet making device
Turf charcoal, sludge, animals manure, lignite, fermented straw, etc are utilized as resources for natural plant food production as well as granulation. The above data are based upon peat, animals manure, and fermented straw, and also various other basic materials go through speculative information.
3. Installment of fertilizer pelletizer equipment.
( 1 ) Setup: The organic plant food pellet making equipment requires to put concrete foundation prior to installment to assist in the transfer of finished materials, and fix and also bonded the organic plant food pellet making equipment as well as the embedded iron with each other to stop the granulator from relocating; channel steel can additionally be utilized to weld the framework.
Location the granulator on the bottom frame; it is also feasible to dig a pit for material transport.
( 2 )Commissioning: After the natural plant food pellet making machine is installed, it is essential to check whether the parts of the granulator are attached. Then execute the no-load test run. During the trial run, there must be no rubbing or touching, no abnormal noise, as well as no resonance.
The temperature of each bearing of the organic fertilizer pellet mill ought to climb steadily. At the end of the test run, the temperature level of each element should not be higher than 50 ℃. There need to be no major damage. When the trial run is in regular manufacturing, it must be fed equally.
( 3) Maintenance of organic fertilizer pellet making device:
a. The bearing is lubed once per change. The lubricating oil kind is No. 3 calcium-based oil lubricating oil, and also the filling amount is 1/3 ~ 1/2. The new lubricating oil should be replaced regularly. The natural fertilizer pellet making machine bearing should be washed when replacing.
b. Lubricating oil have to be added before the reducer is utilized. The lubricating oil is typically HJ40-50 mechanical oil, and HL20-30 gear oil can additionally be used. The oil degree of the lubricating oil must be within the range indicated by the round oil mark on the maker base.
After the very first refueling operation for 100 hrs, the brand-new oil should be changed, and every six months after that, and also the oil ought to be cleaned up when changing the oil.
( 4) Using parts:
a. triangular belt
b. Bearings
c. Mixing head
4. Guidelines for use of fertilizer pelletizer
Prior to starting the organic plant food pellet making device, examine whether the link of the machine hangs, and also pay special interest to whether the stirring head is loose.
The natural plant food pellet making maker is strictly banned to begin with lots.
When the natural fertilizer making maker is shut off, quit feeding initially, as well as turn off the power after the material in the maker is totally released. Long-term shelving is not necessary to eliminate the products in the body to stop sticking.
It is purely restricted for iron blocks, stones, wood sticks and various other sundries to enter the machine to avoid damages to the maker.
When starting the main electric motor, initial focus on the tightness of the V-belt. If the V-belt slips when it is as well loose, the natural plant food pellet making device will not rotate generally.
If it is also tight, the service life of the organic fertilizer pellet making maker bearing and the V-belt will certainly be influenced. Then check whether the turning instructions is appropriate, if it revolves in the opposite instructions, quit as well as adjust immediately.
For details please contact: About Richi Machinery
WhatsApp：86 138 3838 9622
Email：enquiry@richipelletmachine.com
留言列表