The  rate of the biomass pellet production line is  identified by the  basic materials  made use of.  As an example, if the raw  products are branches  and also trunks with high moisture  material, they should be  broken - crushed -  dried out - granulated - packed -  delivered. It  generally depends on what  resources are  utilized. 350  kind biomass pellet machine  tools 38,000,  version: 350 type 300 ~ 500 kg per hour, 450  kind 500 ~ 800 kg, 560 type 1 ~ 1.5  lots, 600 type 2 tons, 850  kind 3 ~ 4  lots.

The good selling in Indonesia biomass pellet production line  rate depends on your raw materials  and also output  dimension.  First off, you need to  understand what your  resources are. The raw materials are  prefabricated sawdust or wood chips and the moisture content of the materials is 10%-15%. A  manufacturing facility  used  brand-new  innovation  timber pellet  equipment  suffices. If your  basic materials are  unrefined logs, branches,  and so on  require to be  crushed by a  timber chipper  as well as biomass crusher,  after that  dried out in a dryer (if the  wetness exceeds 15%, it needs to be dried), then the  primary  maker is granulated, and then the  product packaging  equipment packs this set of production lines.

 

 

15_副本.jpg

Knowing your raw materials  has to do with the output. The output of the RICHI biomass pellet mill machine is different and the  version is different, so the  rate is also  various. The biomass pellet  assembly line  cost is not only a matter of reporting a number,  yet it is necessary to formulate a plan  as well as  quote according to your  demands.

 To start with, the raw material  dampness  needs of wood pellets are very  stringent. The  wetness  web content of the material is  expensive, which  obstructs the die holes,  to make sure that the particles can not be  generated; if the moisture content of the  product is  as well  reduced, if it is too  completely dry, it is  challenging to form,  as well as the viscosity is  not nearly enough.

 Usually 12%-13%, 15-20% of the raw material  wetness after  inflection is the  requirement for  pushing wood pellets. If the raw  product moisture is  too expensive, the mold resistance  and also  sliding phenomenon  will certainly  happen after the raw material  goes into the biomass pelletizer ring die; pay attention to  regulate the  dampness  web content of the raw  product before entering the biomass pelleting  maker, If the water content is too high, there  will certainly be slippage in the ring  pass away,  leading to the  sensation that it is  difficult to  release.

More details visit: Richi Machinery

If your  resources moisture meets the  needs, a biomass  timber pellet press  maker can produce wood pellets. If it does not meet the requirements, it  requires to be dried, so it needs to be equipped with a wood dryer  as well as a  warm blast  oven.  Naturally this is if your  basic material is  timber chips. If your raw material is wood chips (thickness less than 0.5 mm), it  requires to be  shattered, which is equivalent to adding another  procedure. Some customers'  resources are bark, which is also  feasible after adding a  timber pulverizer.
 Nonetheless, some  consumers' raw materials are wood scraps, because the price of wood scraps is cheap  as well as  very easy to  purchase, so there are many  situations, then it is  needed to add a wood chipper,  initially to  reduce the non-standard  timber scraps into  timber chips,  and afterwards  most likely to crush.
For some customers whose  resources are waste  structure  layouts, it is  required to  transform the  timber chipper to a bamboo plywood crusher.

1-Wood pellet line in Indonesia -Angela-RICHI 6.jpg

Related case:

5T/H biomass wood pellet factory in Austria

Because the bamboo plywood itself has  lots of iron nails, it is  really  simple to  harm the  blade on the wood chipper when  making use of a wood chipper.  One more  factor is that the waste building  layout is relatively  vast,  and also the feed port of the  timber chipper is  typically 1250px.

It is  difficult to manually break it  ahead of time, right? The bamboo plywood crusher can  go into any bamboo plywood with a feed opening of less than 1.25 m,  and also the gnawing  blade of the bamboo plywood crusher is an ingot knife,  as well as the iron nails have little  impact on him.

Unlike wood chippers, the blades are easily damaged. Bamboo plywood is likewise an benefit of making  timber pellets.  Typically, its moisture  material is very  little, between 15-20%.  For that reason,  making use of bamboo plywood as pellets saves the trouble of  timber drying out devices.

arrow
arrow

    Richi Machinery 發表在 痞客邦 留言(0) 人氣()